すべての動画を見る

Video Transcript

Hi, I'm Stefaan Product Line Manager Laser Optics at Edmund Optics. In this video, we will demonstrate how to properly align a TECHSPEC Monolithic Reflective Beam Expander Mark I.

(8.0s) In order to align the monolithic reflective beam expander, a translation stage and a kinematic mount are required. When combined, they will give you three degrees of freedom. The first step is to center your beam on one of the flat retroreflection alignment fiducials. When centered, use the tip and tilt adjustment screws to retroreflect your beam back into the laser cavity for a moment. These flat areas on the beam expander are manufactured in the same process as convex and concave faces. This allows us to use the flat faces as references for aligning the beam expander, as they are held to very tight tolerances. Once the beam is directed back at the laser and parallelism has been achieved in the beams, simply use the translation stage to slide the optically powered surfaces of the beam expander into the path of the laser beam. The ideal position in X and Y with respect to the sides of the part is dependent on the stock number being used and can easily be found on the downloadable web drawings. The resulting beam should be magnified, in this case, by five times.

(2.5s) To learn more about TECHSPEC Monolithic Beam Expanders, please visit our website at www.edmundoptics.com/monolithic. (2.3s)

モノリシック構造ビームエキスパンダーのアライメント方法

モノリシック構造反射型ビームエキスパンダーは、広帯域もしくは多波長ビームの拡大に最適です。オール反射デザインを採用しているため、チューナブルレーザー、紫外 (UV) レーザー、超短パルスレーザーをはじめとする様々なレーザー光源に使用可能です。また、様々な機能を統合したデザインなので、固定やアライメントも容易です。この動画では、TECHSPEC® モノリシック構造反射型ビームエキスパンダー (Mark I) の正しいアライメント方法をご紹介しています。また、詳細はwww.edmundoptics.jp/monolithicをご参照ください。