TECHSPEC® ブランドの製品は、エドモンド・オプティクスによってデザイン、規格化、あるいは製造されます。もっと詳しく

TS 誘電体膜ステムミラー 25mm 超短パルス用反射強化銀コート

TECHSPEC® Stemmed Mirrors

TECHSPEC® Stemmed Mirrors TECHSPEC® Stemmed Mirror TECHSPEC® Stemmed Mirror TECHSPEC® Stemmed Mirror mounted in a kinematic mount (not included) +1
×
商品コード #17-553 5-7営業日
×
- +
¥23,850
数量 1-5
¥23,850
数量 6+
¥19,050
製品情報ダウンロード
有効径 CA (mm):
22.50
コーティング:
Ultrafast-Enhanced Silver (600-1000nm)
直径 (mm):
25.00 +0.00/-0.10
基板: Many glass manufacturers offer the same material characteristics under different trade names. Learn More
Fused Silica (Corning 7980)
表面品質 (キズ-ブツ):
10-5
全厚 (mm):
13.00 ±0.20
タイプ:
Stemmed Mirror
有効径 (%):
90.00
基板裏面側:
Commercial Polish
コーティングスペック:
Ravg >99% @ 600 - 1000nm (0°, All Polarizations)
Ravg >99% @ 540 - 1000nm (45°, S-Polarization)
Ravg >98.5% @ 730 - 870nm (45°, P-Polarization)
波長域 (nm):
600 - 1000
平面度 (P-V):
λ/10
コーティングタイプ:
Ultrafast-Enhanced Silver
損傷閾値, 参考値: Damage threshold for optical components varies by substrate material and coating. Click here to learn more about this specification.
0.3 J/cm2 @ 48fs FWHM, 100Hz @ 800nm (S-Polarization)
0.16 J/cm2 @ 48fs FWHM, 100Hz @ 800nm (S-Polarization)
GDD スペック:
0 ±20fs2 @ 600 - 1050nm
ステム径 (mm):
12.50 +0.00/-0.10
対応するキネマティックマウント :
ステム長さ (mm):
6.50 ±0.20

環境規制対応状況

RoHS 2015/863:
Reach 223:
適合証明書:

製品群全体の紹介

  • 取付時のミラー面の応力を低減するステムデザイン
  • 低熱膨張の丈夫な合成石英構造
  • 反射強化アルミ, 保護膜付き金, 保護膜付き銀のコーティング
  • TECHSPEC® レーザー用広帯域誘電体膜コート付きステムミラー もラインナップ

TECHSPEC® 金属膜コート付きステムミラーは、反射強化および保護膜の付いた金属膜コート付きミラーに固定時の低応力を提供します。TECHSPEC 円形光学素子用キネマティックマウントEシリーズ キネマティックマウントに固定するためにデザインされており、ミラーとキネマティックマウント間の接触全てはステム部を通して行われるため、ミラー光学面に掛かる応力を低減します。その応力を低減するデザインと合成石英のモノリシック構造により、従来の平面度λ/10の平面ミラーと比較して卓越した熱的安定性と平面度の改善、そして耐久性を実現します。TECHSPEC® 金属膜コート付きステムミラーは、光学系内への取り付けや実装が容易で、可視やIRスペクトルでのビームステアリングや反射アプリケーションに最適です。

補足: 特注のオプションは、お問い合わせください。

A comparison of the aberrations introduced to a λ/10 Stemmed Mirror and a λ/10 First Surface Mirror when mounted in a kinematic mount. As shown, a Stemmed Mirror stays within λ/10 specification up to 12 inoz of torque (“hand-tight”) while a First Surface Mirror becomes out of specification with a surface flatness of λ/5.
A comparison of the aberrations introduced to a λ/10 Stemmed Mirror and a λ/10 First Surface Mirror when mounted in a kinematic mount. As shown, a Stemmed Mirror stays within λ/10 specification up to 12 inoz of torque (“hand-tight”) while a First Surface Mirror becomes out of specification with a surface flatness of λ/5.
Stemmed Mirrors are mounted to kinematic mounts by a stem on
their back surface, resulting in no contact with the edges of the
mirror surface.
Stemmed Mirrors are mounted to kinematic mounts by a stem on their back surface, resulting in no contact with the edges of the mirror surface.
 
販売や技術サポート
 
もしくは 現地オフィス一覧をご覧ください
簡単便利な
クイック見積りツール
商品コードを入力して開始しましょう